If a window in your car has broken, here are five things you should do: replace the glass and inspect the vehicle, cover the window. This is an important step to take before doing anything else. Keep reading to find out what to do if your car window breaks. Call Your Insurance and File a Police Report.
Start by removing larger pieces of glass. Use your hands to pick up and throw away broken parts in the bag or container. Carefully separate any remaining glass that is still attached to the car. Then use a shop vacuum to vacuum smaller pieces of glass inside the car, around the window frame and down into the seal.
The long vacuum attachment is useful for reaching small fragments of the carpet, seat and interior of the car door. Even more dangerous is the decision to leave them alone. The opening they offer will be exploited by evildoers to steal your possessions. Driving with a hole in the window can also be fatal, as external elements can interfere with concentration.
Hence the reason you need to know how to cover a broken car window. It may not be a permanent solution, which would be to repair all the glass, but it would allow you to run your daily errands before you have time to take the car to the mechanic. Since glass pieces may have fallen on the seats and upholstery of your car, you will need to vacuum and then remove them to prevent cutting. Use a car vacuum with vehicle-specific accessories to clean seats, headrests, and carpets.
Attach the attachment in the form of a nozzle to the vacuum head and also remove debris from the window seal. Don't rush this step, as it is essential for your safety that you remove all glass debris before moving on to the next steps. Dampen a dry microfiber cloth with a few drops of water. Use it to clean the window.
It will ensure that the surface is clean so that the tape sticks properly. Then clean the window with a dry microfiber cloth, as you need to dry the surface before applying the tape. Open your car door and sit in the seat next to the broken window. Measure the hole dimensions (length and width), and then cut the plastic garbage bag accordingly.
Then carefully place the bag over the hole. Depending on the extent of the hole, you can use one or both hands to hold the plastic bag firmly against it. Apply adhesive tape to the plastic bag. Tape the center of the plastic bag with adhesive tape, as it would provide an extra strong hold.
Make sure there are no gaps between two successive layers of the tape. Gaps can serve as moisture ingress if it rains or snows, allowing water to seep into the car and into the seats. Whenever you want to be very careful, you can apply a second layer of packaging tape. In addition to applying it on the first layer, apply the second layer around the edges, that is, this will ensure that the tape will stay firm.
Touch the tape and see if it sinks inwards. Doing so is a sign that you need to remove the initial layers of the tape and apply new ones. However, if the plastic bag remained taut while you were tapping it with your fingers, your work ends there. Whenever one or more of your car windows are broken, the first thing to do is to temporarily remove the glass parts from the seats with a car vacuum before covering the glass with the method given above.
Next, you should schedule an appointment to repair all the glass. Covering the window with plastic or any other material causes visibility problems and creates more blind spots. Hence the reason you should treat coverage as a temporary agreement. Don't hesitate to contact Express Mobile Mechanic if you have any questions.
Save my name, email and website in this browser for the next time I comment. A broken car window should be repaired as soon as possible, as a temporary window cover will hinder your visibility and leave your car in an easy target for thieves. .Express Mobile Mechanic Tampa
20229 Still Wind Dr, Tampa, FL 33647